Small Decal Application Instructions
DECALS CAN BE APPLIED TO THE INSIDE OR OUTSIDE OF
WINDOWS
Step 1
Clean the area thoroughly.
Step 2
Measure and place the decal in the desired location.
Use masking tape to hold decal in place like a hinge.
Hint: Do not install the Decal in extreme heat or cold.
Step 3
Lift the Decal up & peel the paper backing off the Decal.
Be careful not to pull the masking tape off.
Step 4
Slowly lower the Decal & rub it in place with a credit card or similar item to remove any
bubble & insure the Decal has adhered to the surface.
Step 5
Slowly peel the clear cover off at an angle (not straight up).
Be very careful not to pull the Decal off the surface.
If the Decal pulls away from the surface repeat step 4.
Use a pin to poke any air bubbles in the center and push the air out through the hole.
Large Decals & Windshield Decal Instructions
Step 1
Clean the area thoroughly.
Step 2
Measure & place the Decal in the desired location.
Use masking tape to hold Decal in place like a hinge.
Hint: Do not install the Decal in extreme heat or cold.
Windshield Decals
Cut into 3 parts between letters after it is taped to the window
Step
3
Lift Decal up & peel the paper backing off the Decal.
Be careful not to pull the masking tape off.
Keep a hold of the bottom of the Decal to keep it from sticking to itself or the surface before you want it to.
Step 4
Slowly lower the Decal & starting at the top middle & then the outer edges firmly rub the Decal into place with a credit card or similar item to remove any air bubbles.
Step 5
Slowly peel the clear cover off at an angle (not straight up).
Be very careful not to pull the sticker off the surface.
If the sticker pulls away from the surface repeat step 4.
Use a pin to poke any air bubbles in the center and push the air out through the hole.
Windshield Decals
Repeat step 3-5 for each of the 3 parts that you cut it into.